Close

MultiTest 5000

Highly flexible testing of short to medium length cables

Overview

The MultiTest 5000 provides the highest level of testing flexibility. Systems from the MultiTest 5000 series are based on a workpiece carrier circulation system. A standardized setup enables a maximum of six processes to be carried out. Additional process steps can be added, however, this means that the system can no longer be set up as a standardized platform. MultiTest 5000 systems are mainly used to process short to medium length cables, with connectors on at least one end. As a general rule, components are fed into the systems manually. However, the unloading can be carried out fully automatically. MultiTest 5000 systems function with a minimum cycle time of five to six seconds. 

Test Options

Electrical connection tests

  • Continuity test
  • High voltage
  • Open
  • Resistance
  • Reverse polarity
  • Short circuit

Presence checks

  • Alignment and fastening pins
  • Cable shoes
  • Cable ties
  • Caps and covers
  • Clips
  • Connectors
  • Other presence checks

Mechanical checks

  • Forces
  • Pin height/pin length
  • Pin material (plastic/metal)
  • Swash circumference check
  • Temperatures
  • Torques
  • Vacuum pressure tests

Visual checks

  • 3D scanning
  • Barcode
  • Colors
  • Data matrix
  • Hole diameter
  • Pattern matching
  • Swash circumference check
  • Text

Component checks | Electrical values

  • Capacitors
  • Coils
  • Currents
  • Diodes
  • LEDs
  • Resistors
  • Static and dynamic HALL sensor testing

Applications

Cables and cable harnesses
Function modules
Hybrid assemblies
Plug connectors and plastic parts