Close

PreFeeder 3200

Prefeeding Machine Puller Type

Overview

The belt driven puller feeder type can pull wires and cables from a spool. The system is available with different accumulator systems:

  • Pendulum arm accumulator for high dynamic feeding
  • Loop limit control for rigid cables
  • Inlet pendulum arm for smoothly acceleration of the spool

Customer Benefits

  • Adaptable for various applications and cable types
  • Easy handling and high feeding dynamics for efficient production
  • Integrated circuits for safety operation

Application Range

  • Prefeeding by pulling directly from a spool
  • Flexible and / or rigid wires and tubes up to 35 mm (1.38“)

Technical Data

Raw Material Diameter

35 mm (1.38”)

Pulling Force

330 N (73 lbf)

Feed Rate

0 – 2.5 m/s (0 – 8.2 ft./s)

Power Supply

100/115 VAC, 60 Hz, 230/240 VAC, 50 Hz, 850 Watt

Compressed Air Connection

6 bar (90 psi)

Accumulator Storage Capacity

1,800 mm (70.8“) with 2 loops or 900 mm (35.4”) with 1 loop, depending on cable stiffness

Weight

150 kg (330 lbs.) Base machine
20 kg (44 lbs.) Inlet Accumulator
20 kg (44 Ibs.) Accumulator speed control 1
10 kg (22 lbs) Loop Limit Control

Dimensions (L x W x H)

710 x 560 x 1,400 mm (28 x 22 x 55”) Base machine
1,400 x 560 x 1,400 mm (55 x 22 x 55”) with Accumulator Speed Control Arm
2,090 x 600 x 1,400 mm (82 x 24 x 55”) with Inlet Accumulator & Accumulator Speed Control
410 x 310 x 1,040 mm (16 x 12 x 41”) Loop Limit Control

CE-Conformity

The PreFeeder 3200 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility

Important Note

Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.