Close

HotStamp 4140

Hot Stamp Marking Machine

Overview

The HotStamp 4140 is designed for economical, high quality marking of wires, cables and tubing. Character combinations and character sizes are freely selectable. Although primarily used for marking wires and cables, the HotStamp 4140 is suitable for marking all sorts of thermoplastic materials.

Application Range

The Schleuniger model HotStamp 4140 is designed for the economical and high quality marking of wires and tubes. The combination of characters and character size can be selected freely within the specific range. The hot-stamp marking process is suitable for marking thermoplastic materials. During the process the preheated character wheels imprint the precision-engraved characters by pressing the pigmented marking foil into the selected material. The concave form of the characters is exactly matched to the diameter of the processed material. The precise adjusting options for the stamping pressure and time and the marking temperature allow to recall every result.

Technical Data

Raw Material Diameter

1 - 12 mm (0.04 - 0.5")

Marking Pressure

Adjustable from 0.1 to 0.7 MPa (1-7 Bar) / 15-105 psi

Marking Temperature

Adjustable from 0° to 160° C (32° –345° F)

Stamp Time

Adjustable from 0.1 to 3.0 s

Compressed Air Connection

0.7 Mpa (7 bar) / 100 psi

Options

Foot pedal / Standard and customized types / Interface cables for in-line operation

Number of Wheels

Maximum 25

Characters per Wheel

40 characters per wheel (all alphanumeric characters)

Character Size

Horizontal: 1.2 / 1.5 / 1.6 / 1.7 / 1.8 / 2.0 / 2.1 / 2.2 / 2.5 / 2.7 mm
Vertical: 1.2 / 1.6 mm

Marking Foil

Foil material: PVC-Foil, Teflon-Foil
Foil colors: black, white; on request: red, yellow, green, blue

Power Supply

115 VAC, 230 VAC, 200 VA, 50-60 Hz

Dimensions (L x W x H)

Marking unit: 180 x 240 x 250 mm (7 x 9 x 10”)
Control unit: 390 x 220 x 80 mm (16 x 9 x 3”)

Weight

Marking unit: 10 kg (22 lbs.)
Control unit: 5 kg (11 lbs.)

CE-Conformity

The HotStamp 4140 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.

Important Note

Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.

More Info

Features

  • Schleuniger HotStamp Marking Systems are designed for use with Schleuniger cut and strip equipment. The characters of the character wheel can be changed quickly with the index system and contribute to the high economic efficiency
  • Without having to change the character wheels it is possible to realize up to 25-digit markings in alpha-numeric characters