Close

STS 1100

Tinning Station for CrimpCenter

Overview

The STS 1100 tinning station is designed for fluxing and lead-free tin coating of stripped wire ends with cross sections up to 2.5 mm² (14 AWG) and tinning lengths up to 5 mm (0.2''). Optionally, wire ends with cross sections up 4 mm² (12 AWG) and tinning lengths up to 10 mm (0.39'') can also be processed.

  • Very short cycle times
  • Full integration and control via CrimpCenter operating software EASY
  • For use with lead-free tin
  • Consistently tinned diameters
  • Wire cross sections up to 2.5 mm² (14 AWG), optional up to 4 mm² (12 AWG)

Application Range

The STS 1100 tinning station is designed for fluxing and tin coating of stripped wire ends using lead-free solder. The STS 1100 is perfectly suited for either fully automatic crimping machines or transfer systems. Conductors are coated with flux before passing to the solder. The STS 1100 tinning station can accommodate lead or lead-free solder and meets all requirements for evenly distributed tinning. All surfaces of the STS 1100 that are exposed to aggressive lead-free solder (such as the solder bath and pump), have been treated with a special coating to prevent corrosion and ensure a long product lifetime. If twisting of the conductor strands is required prior to fluxing and tinning, the STW 1100 twisting station can be integrated into your CrimpCenter in combination with the STS 1100 tinning station.

Technical Data

Conductor Cross-Section

Up to 2.5 mm² (14 AWG)
Possibly 4 mm² (12 AWG) depending on wire

Tinning Length

Up to 5 mm (0.20“)
possibly 10 mm (0.40“) depending on wire

Operating Temperature

400° C (752° F), adjustable

Power Supply

3 / N / PE AC 400 V; 50 – 60 Hz 3A

Dimensions (L x W x H)

145 x 400 x 570 mm (15.7 x 5.7 x 22.4“) (with optional base frame)
172 x 385 x 530 mm (15.1 x 6.8 x 21.0) (Flux-Tank)

Weight

Approx. 20 kg (Including fixed base) (44 Ibs)

CE-Conformity

The STS 1100 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.

Important Note

Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.

More Info

Options

  • Fixed base frame
  • Base frame with horizontal adjustment
  • Machine drip protection (different versions available)
  • Special nozzles to optimize solder flow

Features

  • Full integration and control via CrimpCenter operating Software EASY
  • For use with leaded or lead-free solder
  • Consistently tinned diameters
  • Wire cross sections up to 2.5 mm² (14 AWG)
Compatible with
Cut, Strip & Terminate