Close

SLD 4100

Double Gripper Module for CrimpCenter

Overview

The SLD 4100 double gripper module gathers two single wires with outer diameters from 1 - 4 mm (0.039” - 0.157”) in the proper orientation allowing the swivel arm gripper to collect them. The wires are then moved to a separate station for termination into a doubling crimp. The wires may have different lengths.

  • Space-saving, fully pneumatic module
  • Horizontal or vertical doubling
  • Wires to be doubled can have different lengths
  • All parameters are fully programmable (no mechanical adjustments)
  • Simple programming directly in CrimpCenter EASY software

Application Range

The SLD 4100 double gripper module can be used with all models of the CrimpCenter family for processing horizontal and vertical doubling crimp applications. The module gathers two single wires in the proper orientation allowing the swivel arm gripper to collect them. The wires are then moved to a separate station for termination into a doubling crimp. The SLD 4100 can process two wires with outer diameters from 1 to 4 mm (0.039 - 0.157”). Each wire can have a different length and depending on the terminal design, wire orientation can be either vertical or horizontal. Wire orientation is fully programmable in the CrimpCenter EASY operating software and no tools are needed for changes.

Technical Data

Raw Material Diameter

1 – 4 mm (0.039 - 0.157”)

Power Supply

DC 24 V, 10 A

Compressed Air Connection

6 bar (90 psi), oil-free, dried and filtered compressed air

Dimensions (L x W x H)

122 x 380 x 405 mm (4.80 x 14.96 x 15.95”)
Including connections

Weight

6.5 kg (14.3 lbs.)

CE-Conformity

The SLD 4100 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.

Important Note

Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.

More Info

Features

  • Horizontal or vertical doubling
  • Wires to be doubled can have different lengths
  • All parameters are fully programmable without mechanical adjustments
  • Simple programming directly in CrimpCenter EASY operating software
Compatible with
Cut, Strip & Terminate