UniCrimp 100

Crimping Machine


The UniCrimp 100 is an excellent solution for customers looking for a simple, low-cost crimping press. The UniCrimp 100 can deliver up to 2.2 tons (20 kN) of crimping force for applications up to 6 mm2 (10AWG).

  • Simple design that is very easy to use.
  • Extremely cost effective
  • High quality results

Application Range

The UniCrimp 100 accepts most side- and rear-feed, pneumatic and mechanical feed mini-style crimping applicators.

  • Open barrel
  • Closed barrel
  • Pre-insulated
  • Mylar Tape

Technical Data

Crimping Force 20 kN (2.2 tons)
Conductor Cross-Section Up to 6 mm² (10 AWG) (Material thickness up to 0.75 mm [0.03”] / Length of the crimping zone up to 6 mm [0.24”])
Stroke 40 mm (1.58”)
Shut Height 135.78 mm (5.346”)
Activation Foot Pedal
Noise Level

< 70 dB (A)

Power Supply 120 VAC, 60 Hz
Dimensions (L x W x H) 380 x 400 x 710 mm (15.0 x 15.8 x 28.0”)
Weight 55 kg (121 lbs.)
CE-Conformity The UniCrimp 100 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Important Note Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.