Close

Uni-M Applicators

Universal Crimp Applicators

Overview

The Uni-M is the latest generation crimp applicators for use in both automatic and semi-automatic benchtop crimping machines. Banded terminals of open or closed barrel construction with either metal or plastic carriers can easily be processed.

  • Economically priced applicators to handle practically all terminal and feed types
  • Rugged construction and simple set up to ensure long life and high quality results
  • Includes convenient micro-adjust dials, a 6-digit counter and one additional set of tooling
  • For use on automatic terminating machines as well as benchtop crimping presses
  • Extensive application range

Application Range

The Uni-M family of applicators are designed for use with side- and end-feed, banded terminals of open or closed barrel construction. Handling and set-up is as easy as ever. The Uni-M is suitable for use on automatic wire processing systems as well as on benchtop presses for terminals with either metal, plastic or Mylar tape carrier strips.

  • Open barrel terminals on metal carrier strips, with or without weather seals
  • Pre-insulated terminals on plastic or Mylar tape carrier strips
  • Front, middle or center carrier strips
  • Insulated end ferrules in strip form
  • Open barrel end ferrules (clips) in strip form
  • Wire splice terminals

Technical Data

Feed Type

Mechanical or pneumatic

Stroke

40 and 30 mm (1.57 or 1.18") (Other strokes available on request)

Conductor Cross-Section

< 10 mm2 (8 AWG)

Terminal Pitch

Maximum: 27 mm (1.06”) (pneumatic feed recommended for 25 mm (1“) or more)

Crimp Height Adjustment

Increment: 0.01 mm (0.0004”)
Maximum: 2.7 mm (0.106”)

Compressed Air Connection

6 – 8 bar (90 – 110 psi) (pneumatic applicators only)

Weight

3.9 kg (8.6 lbs.)

Important Note

Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.

More Info

Features

  • Economically priced applicators to handle practically all terminal and feed types
  • Rugged construction and simple set-up to ensure long life and high quality results
  • Includes convenient micro-adjust dials, a 6-digit counter and one additional set of tooling
  • Includes two feed cams for pre- and post-feed use. All cams work with both 40 and 30 mm press strokes.
  • For use on automatic terminating machines as well as benchtop crimping presses

Models

  • Mechanical side- and end-feed
  • Pneumatic side- and end-feed
  • Pneumatic side-feed for insulated end ferrules
  • Pneumatic side-feed for Mylar tape
  • Mechanical end-feed for splice terminals
  • Asian applicator body styles

Options

  • Additional tooling sets
  • Cross sectional images
  • Capability studies on crimp height and pull test
  • Integrated wire funnels (for closed barrel terminals)