閉じる

CableCoiler 500

Coiling Machine

概要

The CableCoiler 500 is a light-weight, economical single pan coiling machine used to coil wire or cable weighing up to 4 kg (8.8 lbs.).

適用範囲

The CableCoiler 500 is a light-duty, economical single pan coiling machine used to coil wire or cable. It is designed to interface with Schleuniger automatic cut and strip machines. Thanks to its flexibility, ease of use and ergonomic design, the CableCoiler 500 is the perfect solution to improve the production rate and efficiency of your wire or cable processing line.

As the wire or cable exits the cut and strip machine, it passes through a guide tube and into the CableCoiler 500 coiling pan. The coiling pan speed is synchronized with the speed of the exiting wire or cable, making a uniform sized coil. The operator can change the diameter of the coil by adjusting the “Relative Speed” setting on the CableCoiler 500.

技術資料

最大外径

Up to 12 mm (0.47”)

ワーク長さ

Minimum 1,800 mm (71.0”) depending on the coiling diameter

コイル径

Inner: Maximum 150 mm (6.0”)
Outer: Maximum 300 mm (12.0")

コイル重量

Maximum 4 kg (9 lbs.)

巻取り速度

Maximum 250 RPM

搬送速度

Maximum 2.0 m/sec (6.6 ft/sec)    

ワイヤ高さ

Adjustable from 864 – 1,067 mm (34.0 to 42.0”)

インターフェース
  • WS/Postfeed interface (for use with Schleuniger machines with WS/Postfeed standard)
  • Optical interface (for use with other Schleuniger machines or 3rd party machines)
  • Footpedal to initiate machine cycle (active only when using the WS/Postfeed interface)
電源供給

110, 115, 230 or 240 VAC

消費電力

Maximum 100 VA

サイズ (L x W x H)

610 x 560 x 1,000 mm (24.0 x 22.0 x 39.3”)

重量

20 kg (44 lbs.)

CE 適合性

The CableCoiler 500 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.

注記

Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.

さらに見る

Features

  • “Relative Speed” control for fully adjustable coiling speed
  • “Eject Time” control for adjusting coiling time after wire or cable is cut (only active with WS/Postfeed interface)
  • Supports new Schleuniger WS/Postfeed interface standard
  • Optical sensor for easy interfacing with machines which have no WS/Postfeed interface integrated or 3rd party cutting and stripping machines
  • Welded steel base with wide range of height adjustment
  • Locking casters for easy maneuverability