Prefeeding Machine, Dereeler Type
The PreFeeder 4350 is a powerful cable feeding system for reels weighing up to 400 kg (880 lbs). The system distinguishes itself through its simple design and ease of use. For easy reel handling and fast changeovers, all axes are electrically driven. The PreFeeder 4350 uses a shaftless design for easy loading and unloading of reels.
The integrated cable accumulator controls the speed of the dereeling drive. Surveillance functions provide enhanced security during setup and operation. With this concept a cost efficient solution for a wide range of applications is achieved.
- Powerful cable feeding system for reels weighing up to 400 kg (880 lbs) with a maximum diameter of 900 mm (36”)
- Shaftless design for easy loading and unloading of reels
- Motorized axes for fast changeovers and simple operation
- High feeding dynamic allows higher production rates and increases the economic efficiency of the processing line
Cable diameter up to 35 mm (1.4")
Reel size up to 900 mm (36") in diameter
Reel width up to 660 mm (26")
Reel weight 400 kg (880 lbs)
400 - 900 mm (16 - 36“)
280 - 660 mm (11.0 - 26.0“)
40 - 125 mm (1.6 - 5.0“)
400 kg (880 lbs.)
Maximum 35 mm (1.4“)
Up to 280 rpm, adjustable for optimized feed dynamics
HS/PF standard, Emergency Stop
1,420 mm (56“) with 1 loop (wire up to 35 mm (1.3“))
|サイズ (L x W x H)||
Back feeding: 2,730 x 1,750 x 1,700 mm (107 x 68 x 67“)
840 kg (1,848 lbs)
3 x 400 VAC, N, 5 KW, compressed air 6 bar (90 psi)
6 bar (90 psi)
The PreFeeder 4350 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.