Close

PullTester 25

引っ張り力試験器

概要

概要

引っ張り力試験器PullTester 25 は、卓上型モーター式引張り力試験装置です。あらゆるケーブルに圧着されている端子の引張り力を正確に測定します。
 

  • 引張り率用のコントロールされたスピードモーター
  • 簡単プログラム&読みやすいシンプル LCD ディスプレイ 
  • 繰り返し精度&精密データ
  • あらゆるタイプのターミナルホルダ
  • RS 232インターフェース、カーブ分析&統計をオプションの WinCrimp PC ソフトウェアで処理

適用範囲

Application Range

Schleuniger’s PullTester 25 is a dual-range, motorised, bench-top unit designed to measure pull-test forces of crimp and ultrasonic weld connections on a wider range of wires than single-range pull test devices. Pull test values are critical parameters for quality control and assurance.

This versatile machine has two measuring ranges, which are individually calibrated enabling use of its 500 N (110 lbs.) scale for small wires, while easily switching to its 1000 N (220 lbs.) scale for larger wires. This dual-range capability ensures the highest accuracy for the widest range of applications. Hand actuated or pneumatic pull test devices can give inconsistent data depending on the operator or pull rate. Some standards specify that a test device must pull with a consistent rate.

The Schleuniger PullTester 25 is equipped with a speed-controlled motor, ensuring consistent pull rates throughout the measuring range resulting in repeatable and accurate data. Pull forces can be measured in pounds, Newtons or kilo ponds. The standard 12-position terminal holder accommodates a wide variety of terminals to suit most applications. A variety of terminal holders, however, are available upon request.

技術資料

測定範囲

Standard: 0 – 500 N and 0 – 1,000 N
(0 – 110 lbf. and 0 – 220 lbf.)
Other variations possible

測定単位

Newton (N), Kilopond (Kp), Poundforce (lbf)

ディスプレイ

LCD 6-digit

圧力精度

+ 0.5% of full scale

ストローク

43 mm (1.69")

プルオフ速度

PullTester 25-25: Selectable 25 or 50 mm/min (0.98“ or 1.97“/min)
PullTester 25-50: Selectable 50 or 100 mm/min (1.97“ or 3.94“/min)

プルオフモード

Pull + Break

メモリ容量

Not available

モニタリング

Device display output; Optional WinCrimp Basic software for visual force-time-table on PC for evaluation.

安全

IP20

ネットワーク

In combination with crimp force monitor and crimp-height measurement device via WinCrimp software. Only one device with RS 232 network. Multiple devices with RS 232-TCP/IP adapters.

インターフェース

RS 232

モーター

24 VDC

重量

8 kg (18 lbs.)

サイズ (L x W x H)

180 x 130 x 380 mm (7 x 5 x 15”)

CE 適合性

The PullTester 25 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.

注記

Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.

    さらに見る

    Features

    • Simple LCD display for easy programming and digital pull force read out
    • Speed-controlled motor for consistent pull rates throughout the measuring range
    • 2 selectable pulling rates
    • Dual range for improved accuracy over a wider range of wires
    • RS 232 interface for curve analysis and statistics with WinCrimp software
    互換性あり
    全自動ケーブル測長・切断・端末加工装置