CableCoiler 1450
Coiling Machine
Overview
The CableCoiler 1450 is a single pan coiling system that is used to coil wire, cable or tubing. It features a rotary design with moveable pins to adjust for different coiling diameters. Another unique feature of this design is the easy unloading scheme, using retracting coiling disc with and an automatic safety cover lift. The machine works in “auto coil of loose rings” mode as an integrated post processing accessory for use with cut and strip machines.
Application Range
Cable diameter is up to 16 mm (0.63”)
Technical Data
| Raw Material Diameter | Up to 16 mm (0.63”) |
| Workpiece Length | Minimum 1,500 mm (59”) |
| Coil Diameter | Inner Diameter 100 – 330 mm (4.0 – 13.0”) |
| Coil Weight | Maximum 40 kg (88 lbs) |
| Coil Height | Maximum 120 mm (4.7”) |
| Coiling Speed | Offline: 1.5 – 4.8 m/s (4.9 – 15.7 ft./s) depending on coil diameter |
| Memory Capacity | Up to 1,000 jobs |
| Interfaces | SMI standard (I/O signals and speed information), Emergency Stop |
| Power Supply | 100/115 VAC, 60 Hz, 230/240 VAC, 50 Hz, 1000 VA |
| Compressed Air Connection | 6 bar (90 psi) |
| Weight | 120 kg (266 lbs) |
| Dimensions (L x W x H) | 610 x 700 x 1,400 mm (24 x 28 x 56“) |
| CE-Conformity | The CableCoiler 1450 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. |
| Important Note | Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine. |
More Info
Parameters and Jobs
- Programmable parameters:
- Cable parameters ( diameter, length in offline mode)
- Coiling parameters (inner/outer diameter)
- Configuration parameters (distance after cutting, speed synchronization adjustment, etc.)
- Programmed parameters can be saved in jobs for easy and fast loading (by UI or even barcode scanner) for operation
- Jobs can be imported/exported between coilers by USB stick
Function
- As the coiling disc rotates, the material is coiled around the inner pins
- When the coiling is completed, the coiler pulls out the material from processing machine and stops
- The coiling disc raises up and takes the coiled material out of the pins while the safety shield opens automatically so the operator can easily remove the coil
- The unique design of coiling system ensures the safety protection during operation by doing all the rotating movements in a down position with closed and monitored cover
