The UniStrip 2300 programmable stripping machine strips wires ranging in size from 0.03 – 8 mm² (32 – 8 AWG) and jacketed cables up to 5.5 mm (0.22") in diameter. This innovative machine does not require any mechanical adjustments to process different wire sizes.
The Schleuniger UniStrip 2300 strips wires ranging in size from 0.03 – 8 mm² (32 – 8 AWG) and jacketed cables up to 5.5 mm (0.22") in diameter. This innovative machine does not require any mechanical adjustments to process different wire sizes. Using the color touchscreen, the operator selects the desired wire size from the preprogrammed library and all parameters (cutting diameter, clamping pressure, blade way back, etc.) are automatically set. The operator edits the stripping and pull-off lengths as required and the machine is ready for operation. The UniStrip 2300 begins the stripping process when the wire end touches the trigger sensor. The wire is automatically clamped and the stripping process is performed according to the programmed values. If desired, the program can be saved to internal memory for future use.
Conductor Cross-Section | 0.03 – 8 mm² (32 – 8 AWG)* |
Raw Material Diameter | Maximum 5.5 mm (0.22") |
Diameter Increments | 0.01 mm (0.001“) |
Strip Length | Minimum 1.5 mm (0.06") |
Pull-Off Length | Maximum 26 mm (1.02") |
Strip Length Increment | 0.1 mm (0.01") |
Cycle Time | 0.35 s (0.75 mm² (18 AWG) wire, stripping length 10 mm (0.39"), pull-off length 5 mm (0.19")) |
Cycle Start | Automatic trigger sensor or optional foot pedal |
Raw Material Type | PVC, PUR, rubber, Teflon, Tefzel, Kapton, etc. |
Clamping | Programmable clamping force |
Memory Capacity | 1,000 wires or cables (memory function only with "extended wire") |
Interfaces | Foot pedal, USB "Host" |
Options | SmartDetect, Foot pedal, thin clamping jaws |
Noise Level | <70 dB (A) |
Power Supply | 100 / 115 VAC, 230 / 240 VAC, 65 W / 50/60 Hz |
Dimensions (L x W x H) | 390 x 130 x 280 mm (15.3" x 5.1" x 11.0") |
Weight | 10 kg (22 Ibs.) |
CE-Conformity | The UniStrip 2300 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. |
Important Note | Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine. *Wires with hard insulations or those that are tightly bonded might not be able to be processed even if they are within the application range stated above. For cross sections larger than 6 mm² (10 AWG), sample processing is required. |
Features
Programmable Processing Parameters