How can we improve your experience?

Please take our short survey.

Website Survey
Choose your language

SemiRigid 1050

Semi-Rigid Coaxial Cable Stripping Machine


Programmable stripping machine for semi-rigid coaxial cables up to 4.50 mm (0.177”) outer diameter and strip lengths up to 30 mm (1.18”).

  • High precision, field proven mechanics based on the previous model SemiRigid 1000
  • User-friendly high resolution 7” color touchscreen
  • Intuitive and easy programming thanks to the excellent menu navigation and predefined cable stripping templates
  • Helpful wizards for machine setup and maintenance
  • Appealing design and ergonomics

Application Range

Semi-rigid coaxial cables from 0.86 (0.034”) up to 4.50 mm (0.177”) outer diameter and strip lengths from 0.10 (0.004”) up to 30 mm (1.18”).

Processing Capabilities

Conformable cable processing
Conformable cable processing
Full strip
Full strip
Pointing of inner conductor
Pointing of inner conductor
Semirigid cable processing
Semirigid cable processing

Technical Data

Raw Material Diameter

Max. 4.50 mm (0.177“)
Min. 0.86 mm (0.034“)

Strip Length

Maximum 30 mm (1.18“)


Length: 0.01 mm (0.00039“) steps
Diameter: 0.01 mm (0.00039“) steps


For turning and removing: 2 pcs.
For turning: 2 pcs. (1 each)
For pointing: 1 set (4 pcs.)

Cycle Rate

> 3 s, (depending upon cable type and programming)

Memory Capacity

1,000 cables


2x USB "Host", Footpedal, Ethernet (on request)

Noise Level

 < 70 db (A)

Power Supply

100/115 VAC, 230/240 VAC, 150 VA, 50/60 Hz

Compressed Air Connection

6 bar / 0.6 MPa / 87 psi

Dimensions (L x W x H)

566 x 215 x 252 mm (22.3 x 8.5 x 9.9“)


Net 19.5 kg (43 lbs)


The SemiRigid 1050 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.

Important Note

Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.