Close

CoaxStrip 6580

Coaxial Cable Stripping Machine

Overview

The CoaxStrip 6580 is a fully programmable multi-step stripping machine for coaxial, triaxial, multi-conductor cable and single conductor wire. State-of-the-art electronics, a clear user interface and precision mechanics guarantee repetitive, unmatched Schleuniger stripping quality. Due to the unique 4 blade concept the machine is able to strip thin, tough and slightly out-of-round insulations. The incisions of the blades are linear and perpendicular to the cable axis, resulting in a clean and highly precise cut. In addition, the protective cover can be removed without tools, thus facilitating maintenance of the machine.

The CoaxStrip 6580 is ideal for low volume, quick changeover applications as well as high volume production runs, giving the best possible flexibility and productivity to your production methods.

  • Precise and powerful
  • Able to strip very thin and tough insulations due to the unique four-blade concept
  • Large processing range
  • Cable diameter verification
  • Barcode scanning function
  • S.ON software

Application Range

Programmable processing parameters:

  • Stripping position
  • Incising diameter
  • Centering jaw diameter
  • Incising speed
  • Rotational speed of the stripping head
  • Rotational direction of the stripping head
  • Incising pause
  • Pull-off diameter
  • Stripping lengths (partial strip or full strip)
  • Pull-off speed
  • Pull-off with or without rotation of the stripping head
  • Freely selectable stripping sequence
  • Cable clamping force

    Material

    • Double-Insulated Wire Processing
    • Wire
    • Single-Conductor Cable
    • Single Wire
    • Solid Wire
    • Shielded Cables
    • Rubber
    • High-Speed Data Cable
    • High-Voltage Cable
    • Cable
    • Coaxial Cable
    • Kapton
    • Discrete Wire
    • Multiconductor Cable
    • Stranded Wire
    • Wire with Special Isolation
    • Polyester
    • Polyurethan
    • PUR
    • PVC
    • Silicon
    • Teflon®
    • Tefzel®
    • Triaxial Cable
    • Corrugated Cable

    Processing Capabilities

    Coax cable strip
    Coaxial cable processing
    Conformable cable processing
    Discrete wire processing
    Discrete wire stripping
    Full or partial strip left and right
    Full strip
    Jacket and inner conductor stripping
    Multiconductor cable stripping
    Multilayer stripping
    Multistep stripping
    Power cable processing
    Triaxial cable processing
    Twisting function
    Two-layer strip

    Technical Data

    Raw Material Diameter

    Minimum 1.5 mm (0.059“)
    Maximum 17 mm (0.67“)

    Diameter Increments

    0.01 mm (0.001“)

    Strip Length

    100 mm (3.94“)

    Strip Length Increment

    0.01 mm (0.001”)

    Stripping Steps

    Maximum 6

    Clamping

    Motor driven with programmable clamping force

    Cycle Time

    ≥ 5 s (depending upon cable type and programming)

    Production Rate

    250 - 550 pcs./h (depending upon cable type and programming)

    Memory Capacity

    1000 cables

    Interfaces

    2x USB, 2x Ethernet, 2x SMI (Option)

    Noise Level

    < 70 db (A)

    Power Supply

    100-240 VAC, 400 VA, 50/60 Hz

    Compressed Air Connection

    0.4 - 0.6 Mpa / 4-6 bar / 5-12 l/min

    Dimensions (L x W x H)

    670 x 200 x 333 mm (26.4 x 7.9 x 13.1”)

    Weight

    28 kg (62 lbs.)

    CE-Conformity

    The CoaxStrip 6580 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.

    Important Note

    Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.