The CoaxStrip 6480 is a fully programmable multi-step stripping machine for coaxial, triaxial, and multi-conductor cable as well as single conductor wire. Fast cycle times, multiple steps with freely selectable stripping sequence, cable diameter verification, cable end detection, and automated cable retraction functions guarantee high precision and reliability. The incisions of the blades are linear and perpendicular to the cable axis, resulting in a clean and highly precise cut. In addition, the protective cover can be removed without tools, thus facilitating maintenance of the machine.
Programmable settings for each step of each program
|Raw Material Diameter|
Minimum 1.2 mm (0.047“)
0.01 mm (0.001“)
50 mm (1.96“)
|Strip Length Increment|
0.01 mm (0.001”)
Motor driven with programmable clamping force
≥ 4 s (depending upon cable type and programming)
400 - 650 pcs./h (depending upon cable type and programming)
2x USB, 2x Ethernet, 2 x SMI (Option)
< 70 db (A)
100 - 240 VAC, 170 VA, 50/60 Hz.
|Compressed Air Connection|
0.4 - 0.6 Mpa / 4 - 6 bar / 5 - 12 l/min
|Dimensions (L x W x H)|
585 x 182 x 370 mm (23 x 7.2 x 14.6”)
22 kg (48,5 lbs.)
The CoaxStrip 6480 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.