The PullTester 326 is a triple-range, motorized benchtop device for measuring pull forces of crimp connections as well as welded connections. The triple-range capability gives the PullTester 326 incredible application flexibility to handle a wide variety of testing applications.
Schleuniger’s PullTester 326 is a triple-range, motorized, benchtop unit designed to measure pull test forces of crimp and ultrasonic weld connections on a wider range of wires than single-range pull test devices. Pull test values are critical parameters for quality control and assurance. The PullTester 326 can also perform non-destructive tests (hold to a specified force). This versatile machine has three measuring ranges, which are individually calibrated. The standard measuring ranges are 200 N, 1,000 N, and 2,000 N (45 lbf., 225 lbf., 450 lbf.), however, other variations are available by special order. This triple-range capability ensures the highest accuracy for the widest range of applications. Hand actuated or pneumatic pull test devices can give inconsistent data depending on the operator or pull rate. Some standards specify that a test device must pull with a consistent rate. The Schleuniger PullTester 326 is equipped with a speed-controlled motor, ensuring consistent pull rates throughout the measuring range, resulting in repeatable and accurate data. Pull forces can be measured in poundforce, Newtons or kiloponds. The standard 14-position terminal holder accommodates a wide variety of terminals to suit most applications. A variety of terminal holders, however, are available upon request.
Standard: 0 – 200 N, 0 – 1,000 N, 0 – 2,000 N (0 – 45 lbf., 0 – 225 lbf., 0 – 450 lbf.), other variations available by special order
|Unit of Measure|
Newton (N), Kilopond (Kp), Poundforce (lbf)
Upper: LCD 6-digit for force readings
0.5% of measurement range
0 – 50° C (0 - 122° F)
43 mm (1.69”)
4 speeds: 50, 75, 100 mm/min. or high speed (1.97, 2.95, 3.94”/min. or high speed)
Pull + Break: Normal pull test until wire breaks
Up to 48 jobs with 50 measurements (2,400 measurements)
Device display output; Optional WinCrimp statistical software for visual force-time-table on PC and statistical analysis for evaluation with download possibility to Microsoft® Excel software.
RS 232 connection directly to printer or via PC using WinCrimp Software
Multiple devices in combination with crimp force monitor and crimp height measurement device via WinCrimp software with either RS 232 or TCP/IP.
Motor 24 VDC
Approximately 11 kg. (24 lbs.)
|Dimensions (L x W x H)|
250 x 130 x 410 mm (10 x 5 x 16”)
The PullTester 326 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.