Schleuniger's PullTester 26 is a dual-range, motorized benchtop device designed to measure pull forces of wire crimp connections as well as ultrasonic metal welding connections on a wider range of wire than single-range pull test devices. The PullTester 26 is specially suited for quality assurance in a production environment.
Schleuniger’s PullTester 26 is a dual-range, motorized, bench-top unit designed to measure pull test forces of crimp and ultrasonic weld connections on a wider range of wires than single-range pull test devices. Pull test values are critical parameters for quality control and assurance. The PullTester 26 can also perform non-destructive tests (hold to a specified force).
This versatile machine has two measuring ranges, which are individually calibrated, enabling use of its 500 N (110 lbf.) scale for small wires, while easily switching to its 1,000 N (220 lbf.) scale for larger wires. This dual-range capability ensures the highest accuracy for the widest range of applications. Hand actuated or pneumatic pull test devices can give inconsistent data depending on the operator or pull rate. Some standards specify that a test device must pull with a consistent rate. The Schleuniger PullTester 26 is equipped with a speed-controlled motor, ensuring consistent pull rates throughout the measuring range resulting in repeatable and accurate data.
Pull forces can be measured in poundforce, Newtons or kiloponds. The standard 12-position terminal holder accommodates a wide variety of terminals to suit most applications. A variety of terminal holders, however, are available upon request.
Standard: 0 – 500 N and 0 – 1,000 N (0 – 110 lbf. and 0 – 220 lbf.) Other variations possible
|Unit of Measure|
Newton (N), Kiloponds (Kp), Poundforce (lbf.)
Upper: LCD 6-digit for force readings
+ 0.5% of full scale
43 mm (1.69")
4 speeds: 25, 50, 100 mm/min. or high speed
Pull + Break: Normal pull test until wire breaks
Up to 48 jobs with 50 measurements for each (2,400 measurements)
Device display output; Optional WinCrimp statistical software for visual force-time-table on PC and statistical analysis for evaluation with download possibility to Microsoft® Excel software
Multiple devices in combination with crimp force monitor and crimp height measurement device via WinCrimp software with either RS232 or TCP/IP.
8 kg (18 Ibs.)
|Dimensions (L x W x H)|
205 x 130 x 405 mm (8 x 5 x 16“)
The PullTester 26 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.