The highly dynamic PreFeeder 60 prefeeding machine has been specially designed for use with fully automatic crimping machines, such as the Schleuniger CrimpCenter models. It feeds wire and cable up to 6 mm² (10 AWG).
The PreFeeder 60 is a highly dynamic prefeeding machine, which has been developed to feed cable gently to cut, strip terminate machines. The PreFeeder 60 can take wires from all kinds of pans and barrels. With a production rate of 9 m/s (29.52 ft/s) (depending on wires and barrels) the PreFeeder 60 has been optimized for high-speed fully automatic crimping machines, such as the Schleuniger CrimpCenter models. The controlled driving method feeds the wire gently and continuously to the active wire storage, while the intake of the fully automatic crimping machine takes the wire out of the storage in order to further process. Due to this arrangement, it is possible to run the fully automatic crimping machine at high capacity even if provisioning of wires causes problems.
Maximum 6 mm² (10 AWG)
Maximum 9 m/s (29.5 ft/s) (depending on wire and barrels)
6.4 m (21ft.) for wires up to 4 mm2 (12 AWG)
0.55 kW 230 V, 50/60 Hz
1 / N / PE AC 200 - 240 V; 50/60 Hz; 0.6 kVA
|Dimensions (L x W x H)|
1,170 x 600 x 1,490 mm (46 x 24 x 58")
84 kg (185 lbs.)
The PreFeeder 60 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Schleuniger recommends that wire samples be submitted in case where there is doubt as to the processing capabilities of a particular machine.