PreFeeder 3200
Prefeeding Machine Puller Type
Overview
The belt driven puller feeder type can pull wires and cables from a spool. The system is available with different accumulator systems:
- Pendulum arm accumulator for high dynamic feeding
- Loop limit control for rigid cables
- Inlet pendulum arm for smoothly acceleration of the spool
Customer Benefits
- Adaptable for various applications and cable types
- Easy handling and high feeding dynamics for efficient production
- Integrated circuits for safety operation
Application Range
- Prefeeding by pulling directly from a spool
- Flexible and / or rigid wires and tubes up to 35 mm (1.38“)
Technical Data
| Raw Material Diameter | 35 mm (1.38”) |
| Pulling Force | 330 N (73 lbf) |
| Feed Rate | 0 – 2.5 m/s (0 – 8.2 ft./s) |
| Power Supply | 100/115 VAC, 60 Hz, 230/240 VAC, 50 Hz, 850 Watt |
| Compressed Air Connection | 6 bar (90 psi) |
| Accumulator Storage Capacity | 1,800 mm (70.8“) with 2 loops or 900 mm (35.4”) with 1 loop, depending on cable stiffness |
| Weight | 150 kg (330 lbs.) Base machine |
| Dimensions (L x W x H) | 710 x 560 x 1,400 mm (28 x 22 x 55”) Base machine |
| CE-Conformity | The PreFeeder 3200 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility |
| Important Note | Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine. |
