Label marking systems are often used for marking wires or cables that are not suitable for inkjet or hot stamp printing and are therefore subject to a complex processing procedure. However, the processing step of labeling can be fully automated: The in-line wire and cable labeling solution Wraptor A6500 from Brady is compatible with Schleuniger cut-and-strip machines, with which it can be used in-line. Customers can thus fully automate labeling processing steps and, as a result, increase the accuracy and efficiency of their production as well as reduce costs.
The Wraptor A6500 is a great tool to control manufacturing cost and enhance identification quality by automatically printing and applying labels. It identifies cables in 5 seconds, eliminates the need to print labels in advance and the time needed to apply them by hand. The Wraptor’s technology enables 300 dpi prints for barcodes, logos and diagrams, and a tight label wrap around the wire, with minimal bubbling or wrinkling.
Detailed information about the Wraptor A6500 can be found on Brady's homepage under the following link: http://www.brady.eu/en-eu/related-information/printers/wraptor-a6500
Text, logos, barcodes, barcodes displayed as plain text, graphics, time, date, and even information and data from production and even sequential serial numbers can be marked anywhere along a wire or cable.
|Raw Material Diameter|
1.52 - 15 mm (0.06 - 0.60”)
Wrapping cycle time: 4.5 - 6.5 seconds per label
End, continuous, others
Minimum wire length: One label width