Hot Stamp Marking Machine
The HotStamp 4500 marks wires and cables up to 15 mm (0.59") outer diameter. Designed for inline-processing, the compact machine can handle a wide range of insulation types, including PVC, Teflon®, Tefzel®, Cross-linked, SXL and GXL.
The Schleuniger HotStamp 4500 is a hot stamp wire marker for a variety of insulation types, including PVC, Teflon®, Tefzel®, Cross-linked, SXL and GXL up to 15 mm (0.59") outer diameter. Its wide carriage enables this compact unit to mark each end of the wire and cable with a different alphanumeric string up to 16 characters long. Since both leading and trailing end marks are applied at the same time, it can also perform double continuous marking at set intervals for greater production rates. The HotStamp 4500 easily interfaces with any Schleuniger cut & strip machine or cutter. An optional foot pedal is also available for stand-alone operations.
|Raw Material Diameter|
Minimum 1.0 mm (0.04“)
|Number of Wheels|
Maximum 38 (requires custom width foil) or 2 x 16 for end marking
|Characters per Wheel|
40 (uses same wheels as the HotStamp 4140)
0 – 6 bar (0 – 90 psi) Integral control with closed loop feedback sensor
0 – 205° C (0 – 400° F) (integrated temperature controller)
Type style: Radiused characters only
Types: Standard (general purpose); Teflon® (for Teflon®) 700K (for Cross-linked, SXL, GXL)
Compressed Air: 6 bar (90 psi)
Input: 24 VDC or contact closure (cycle start)
|Dimensions (L x W x H)|
230 x 535 x 305 mm (9 x 21 x 12“)
26 kg (58 Ibs.)
The HotStamp 4500 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.
- Wide carriage for end marking applications
- Stroke adjustment to ensure maximum production rate based on wire size
- Large selection of character sizes and foils
- Drawer allows quick foil changeover
- Standard V-block wire guide allows marking on cable up to 15 mm (0.59”) outer diameter
- Closed loop integral temperature controller