The CoaxStrip 6580 is a fully programmable multi-step stripping machine for coaxial, triaxial, multi-conductor cable and single conductor wire. State-of-the-art electronics, a clear user interface and precision mechanics guarantee repetitive, unmatched Schleuniger stripping quality. Due to the unique 4 blade concept the machine is able to strip thin, tough and slightly out-of-round insulations. The incisions of the blades are linear and perpendicular to the cable axis, resulting in a clean and highly precise cut. In addition, the protective cover can be removed without tools, thus facilitating maintenance of the machine.
The CoaxStrip 6580 is ideal for low volume, quick changeover applications as well as high volume production runs, giving the best possible flexibility and productivity to your production methods.
Programmable processing parameters:
Raw Material Diameter | Minimum 1.5 mm (0.059“) |
Diameter Increments | 0.01 mm (0.001“) |
Strip Length | 100 mm (3.94“) |
Strip Length Increment | 0.01 mm (0.001”) |
Stripping Steps | Maximum 6 |
Clamping | Motor driven with programmable clamping force |
Cycle Time | ≥ 5 s (depending upon cable type and programming) |
Production Rate | 250 - 550 pcs./h (depending upon cable type and programming) |
Memory Capacity | 1000 cables |
Interfaces | 2x USB, 2x Ethernet, 2x SMI (Option) |
Noise Level | < 70 db (A) |
Power Supply | 100-240 VAC, 400 VA, 50/60 Hz |
Compressed Air Connection | 0.4 - 0.6 Mpa / 4-6 bar / 5-12 l/min |
Dimensions (L x W x H) | 670 x 200 x 333 mm (26.4 x 7.9 x 13.1”) |
Weight | 28 kg (62 lbs.) |
CE-Conformity | The CoaxStrip 6580 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. |
Important Note | Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine. |