CoaxStrip 6480
Coaxial Cable Stripping Machine
Overview
The CoaxStrip 6480 is a fully programmable multistep stripping machine for coaxial, triaxial, and multiconductor cable as well as single-conductor wire. Fast cycle times, multiple steps with freely selectable stripping sequence, cable diameter verification, cable end detection, and automated cable retraction functions guarantee high precision and reliability. The incisions of the blades are linear and perpendicular to the cable axis, resulting in a clean and highly precise cut. In addition, the protective cover can be removed without tools, thus facilitating maintenance of the machine.
Application Range
Programmable settings for each step of each program
- Stripping position
- Incising diameter
- Centering jaw diameter
- Incising speed
- Rotational speed of the stripping head
- Rotational direction of the stripping head
- Incising pause
- Pull-off diameter
- Stripping lengths (partial strip or full strip)
- Pull-off speed
- Pull-off with or without rotation of the stripping head
- Freely selectable stripping sequence
- Cable clamping force
Material
- Cable
- Coaxial Cable
- Corrugated Cable
- Discrete Wire
- Double-Insulated Wire Processing
- High-Speed Data Cable
- High-Voltage Cable
- Kapton
- Multiconductor Cable
- Polyester
- Polyurethan
- PUR
- PVC
- Rubber
- Shielded Cables
- Silicon
- Single-Conductor Cable
- Single Wire
- Solid Wire
- Stranded Wire
- Teflon®
- Tefzel®
- Triaxial Cable
- Wire
- Wire with Special Isolation
Processing Capabilities















Technical Data
Raw Material Diameter | Minimum 1.2 mm (0.047“) |
Diameter Increments | 0.01 mm (0.001“) |
Strip Length | 50 mm (1.96“) |
Strip-Length Increment | 0.01 mm (0.001”) |
Stripping Steps | Maximum 6 |
Clamping | Motor driven with programmable clamping force |
Cycle Time | ≥ 4 s (depending upon cable type and programming) |
Production Rate | 400 - 650 pcs./h (depending upon cable type and programming) |
Memory Capacity | 1000 cables |
Interfaces | 2x USB, 2x Ethernet, 2 x SMI (Option) |
Noise Level | < 70 db (A) |
Power Supply | 100 - 240 VAC, 170 VA, 50/60 Hz. |
Compressed-Air Connection | 0.4 - 0.6 Mpa / 4 - 6 bar / 5 - 12 l/min |
Dimensions (L x W x H) | 585 x 182 x 370 mm (23 x 7.2 x 14.6”) |
Weight | 22 kg (48,5 lbs.) |
CE Conformity | The CoaxStrip 6480 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. |
Important Note | Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine. |