CoaxStrip 6380
Coaxial Cable Stripping Machine
Overview
The CoaxStrip 6380 is a fully programmable multi-step stripping machine for coaxial, triaxial and multi-conductor cable as well as single conductor wire. Very fast cycle times, multiple steps with freely selectable stripping sequence, cable diameter verification, cable end detection, and automated cable retraction functions guarantee high precision and reliability. With Schleuniger‘s standardized S.On user interface for simple programming, a sample programming library and 1,000 program memory, this machine is ideal for low volume, quick changeover applications as well as high volume production runs, giving the best possible flexibility and productivity for your production needs.
Application Range
Programmable Processing Parameters
- Stripping position
- Incising diameter
- Centering jaw diameter
- Incising speed
- Rotational speed of the stripping head
- Rotational direction of the stripping head
- Incising pause
- Pull-off diameter
- Stripping lengths (partial strip or full strip)
- Pull-off speed
- Pull-off with or without rotation of the stripping head
- Freely selectable stripping sequence
- Cable clamping force
Material
- Cable
- Coaxial Cable
- Discrete Wire
- Double-Insulated Wire Processing
- High-Speed Data Cable
- Kapton
- Microcoaxial Cable
- Microtriaxial Cable
- Multiconductor Cable
- Polyester
- Polyurethan
- PUR
- PVC
- Rubber
- Shielded Cables
- Silicon
- Single-Conductor Cable
- Single Wire
- Solid Wire
- Stranded Wire
- Teflon®
- Tefzel®
- Triaxial Cable
- Wire
- Wire with Special Isolation
Processing Capabilities

















Technical Data
Raw Material Diameter | Minimum 0.6 mm (0.024“) |
Conductor Diameter | Minimum 0.15 mm (36 AWG) |
Diameter Increments | 0.01 mm (0.001“) |
Strip Length | Maximum 40 mm (1.57“) |
Strip Length Increment | 0.01 mm (0.001”) |
Stripping Steps | Maximum 6 |
Clamping | Motor driven with programmable clamping force |
Cycle Time | ≥ 3 s (depending upon cable type and programming) |
Production Rate | 400 - 800 pcs./h (depending upon cable type and programming) |
Memory Capacity | 1000 cables |
Interfaces | 2x USB, 2x Ethernet, 3x SMI (Option) |
Noise Level | 61 db (A) |
Power Supply | 100-240 VAC, 50/60 Hz |
Compressed Air Connection | 0.4 - 0.6 Mpa / 4-6 bar / 60 - 90 psi, 5-12 l/min |
Dimensions (L x W x H) | 490 x 182 x 353 mm (19.3 x 7.2 x 13.9”) |
Weight | 19 kg (42 lbs.) |
CE-Conformity | The CoaxStrip 6380 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility |
Important Note | Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine. |