How can we improve your experience?

Please take our short survey.

Website Survey
Your region/language settings differ from the requested site. Do you want to change to suggested region/language?
Ihre Region/Spracheinstellungen unterscheiden sich von der angeforderten Seite. Möchten Sie zu der vorgeschlagenen Region/Sprache wechseln?
Your region/language settings differ from the requested site. Do you want to change to suggested region/language?
Your region/language settings differ from the requested site. Do you want to change to suggested region/language?
Your region/language settings differ from the requested site. Do you want to change to suggested region/language?
Your region/language settings differ from the requested site. Do you want to change to suggested region/language?
Switch to Global/English Wechseln Sie zu DACH - Deutsch Switch to North America/English Switch to North America/Español Switch to Japan/日本語 Switch to China/中文
Close

PullTester 27

Pull Testing Machine

Overview

Schleuniger's PullTester 27 is a dual-range, motorized benchtop device designed to measure pull forces of wire crimp connections as well as ultrasonic metal welding connections on a wider range of wire than single-range pull-test devices. The PullTester 27 is specially suited for quality assurance in a production environment.

  • Speed-controlled motor for consistent pull rates
  • Simple LCD display for easy programming & read out
  • Repeatable & accurate data
  • Dual-range for improved accuracy over a wider range of wires
  • RS 232 interface for curve analysis & statistics with optional WinCrimp PC software

Application Range

Schleuniger’s PullTester 27 is a dual-range, motorized, benchtop unit designed to measure pull-test forces of crimp and ultrasonic weld connections on a wider range of wires than single-range pull-test devices. Pull-test values are critical parameters for quality control and assurance. This versatile machine has two versions with two measuring ranges each, which are individually calibrated, enabling use for small or large cables.

  • PullTester 27 (standard): 2,000 / 5,000 N (440 / 1,100 lbf.)
  • PullTester 27-10 (special): 5,000 / 10,000 N (1,100 / 2,200 lbf.)

This dual-range capability ensures the highest accuracy for the widest range of applications. Hand-actuated or pneumatic pull-test devices can give inconsistent data depending on the operator or pull rate. Some standards specify that a test device must pull with a consistent rate. The Schleuniger PullTester 27 is equipped with a speed-controlled motor, ensuring consistent pull rates throughout the measuring range, resulting in repeatable and accurate data. Pull forces can be measured in poundforce, Newtons or kiloponds. The terminal holder can be designed and manufactured based on your application. In addition, a variety of terminal holders are available upon request.

Technical Data

Measuring Range

Standard: 2,000 / 5,000 N (440 / 1,100 lbf.)
Special: 5,000 / 10,000 N (1,100 / 2,200 lbf.)
Other combinations possible

Unit of Measure

Newton (N), Kilopond (Kp), Poundforce (lbf.)

Display

Upper: LCD 6-digit for force readings
Lower: LCD 4-line for programming and operation

Pressure Precision

0.2% of full scale

Stroke

80 mm (3.14”)

Pulling Speed

PullTester 27-25: Selectable 25 or 50 mm/min (0.98“ or 1.97“/min)
PullTester 27-50: Selectable 50 or 100 mm/min (1.97“ or 3.94“/min)

Pulling Modes

Pull + Break: Normal pull test until wire breaks

Monitoring

Device display output; Optional basic WinCrimp software for visual force-time-table on PC for evaluation with download possibility to Microsoft® Excel software.

Safety

IP 20

Network

Single device in combination with crimp force monitor and crimp height measurement device via RS 232 using WinCrimp software. Multiple devices possible with RS 232-TCP/IP adapters and appropriate WinCrimp.

Interfaces

RS 232

Power Supply100-240 VAC 50Hz
Weight

Approx. 45 kg (101 lbs.)

Dimensions (L x W x H)

640 x 400 x 300 mm (25 x 16 x 12”)

CE Conformity

The PullTester 27 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.

Important Note

Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.

More Info

Features

  • Dual LCD displays for simple programming and operation
  • Speed-controlled motor for consistent pull rates throughout the
    measuring range
  • Dual range for improved accuracy over a wider range of wires
  • Two versions available
    • Standard: 2,000 / 5,000 N (440 / 1,100 lbf.)
    • Special: 5,000 / 10,000 N (1,100 / 2,200 lbf.)
  • Two selectable pulling rates
  • RS 232 interface for curve analysis with WinCrimp software
  • Networking capabilities (optional)
Compatible with
Cut, Strip & Terminate