The CableCoiler 1450 is a single pan coiling system that is used to coil wire, cable or tubing. It features a rotary design with moveable pins to adjust for different coiling diameters. Another unique feature of this design is the easy unloading scheme, using retracting coiling disc with and an automatic safety cover lift. The machine works in “auto coil of loose rings” mode as an integrated post processing accessory for use with cut and strip machines.
Cable diameter is up to 16 mm (0.63”)
|Raw Material Diameter|
Up to 16 mm (0.63”)
Minimum 1,500 mm (59”)
Inner Diameter 100 – 330 mm (4.0 – 13.0”)
Maximum 40 kg (88 lbs)
Maximum 120 mm (4.7”)
Offline: 1.5 – 4.8 m/s (4.9 – 15.7 ft./s) depending on coil diameter
Up to 1,000 jobs
SMI standard (I/O signals and speed information), Emergency Stop
100/115 VAC, 60 Hz, 230/240 VAC, 50 Hz, 1000 VA
|Compressed Air Connection|
6 bar (90 psi)
120 kg (266 lbs)
|Dimensions (L x W x H)|
610 x 700 x 1,400 mm (24 x 28 x 56“)
The CableCoiler 1450 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.
Parameters and Jobs