Close
Choose your language

UniCrimp 500 A

Crimping Station for CrimpCenter

Overview

The UniCrimp 500 A is a crimping machine with 5 tons of press forces. It processes both rear- and side-feed banded terminals (open or closed barrel type) for cable cross sections up to 16 mm² (6 AWG).

  • For processing large cable cross sections up to 16 mm² (6 AWG)
  • For processing rear- and side-feed banded terminals
  • Short cycle times
  • Quick-change applicator base plate
  • Optional crimp-force monitoring

Application Range

The UniCrimp 500 A is a heavy-duty crimping station for use with the CrimpCenter 67 HD16 automatic cut, strip, and terminate machine. For ease of setup, the UniCrimp 500 A is equipped with a creep mode. This enables the drive mechanism to be moved backwards and forwards slowly, to facilitate visual checking.

Technical Data

Crimping Force49 kN (5 tons)
Conductor Cross SectionUp to 16 mm² (6 AWG)
Stroke40 mm (1.58”)
Shut HeightStandard: 158.38 (6.23“)
Optional: 135.78 (5.34“)
Cycle Time1 s
Power Supply1 / N / PE AC 115 - 230 V, 50/60 Hz, 16 A
Dimensions (L x W x H)390 x 550 x 1,290 mm, (15.35 x 21.65 x 50.78”) Without base frame
Weight197 kg (434 lbs.)
CE ConformityThe UniCrimp 500 A fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Important NoteSchleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.

     

    More Info

    Function

    With 5 tons of crimping force, the UniCrimp 500 A processes wire cross sections up to 16 mm² (6 AWG). With the proper crimp applicator, both side- or rear-feed banded terminals can be used. The UniCrimp 500 A is user-friendly and can be equipped with a crimp-force monitoring option.

    Options

    • Alternative applicator adapter plates
    • Crimp-force monitoring
    • Pneumatic feed kit
    • Ring bolt M16 (for transportation with a lifting jack)
    • Transport cases for air/sea/truck packing

    Features

    • Combined crank / knee lever drive for tremendous power generation
    • Quick-change applicator base plate
    • Creep mode for easy setup
    Compatible with
    Cut, Strip & Terminate