How can we improve your experience?

Please take our short survey.

Website Survey
Your region/language settings differ from the requested site. Do you want to change to suggested region/language?
Ihre Region/Spracheinstellungen unterscheiden sich von der angeforderten Seite. Möchten Sie zu der vorgeschlagenen Region/Sprache wechseln?
Your region/language settings differ from the requested site. Do you want to change to suggested region/language?
Your region/language settings differ from the requested site. Do you want to change to suggested region/language?
Your region/language settings differ from the requested site. Do you want to change to suggested region/language?
Your region/language settings differ from the requested site. Do you want to change to suggested region/language?
Switch to Global/English Wechseln Sie zu DACH - Deutsch Switch to North America/English Switch to North America/Español Switch to Japan/日本語 Switch to China/中文
Close

CrimpCenter ACS

Coil-Binding System for CrimpCenter

Overview

The CrimpCenter ACS (AutoCoiling System) is built on the 6-series platform. The auto-coiling function eliminates the need for extension conveyors and significantly reduces the floor space required for long-wire applications. The system will automatically coil, bind and batch long wires during production. Binding is accomplished with tape that can be easily removed for downstream production steps.

  • High performance with minimal space requirements
  • Excellent length accuracy due to servo motor and encoder combination
  • Handles single wire applications with or without seals or terminals on either end
  • Simple operation and set-up via the CrimpCenter EASY software and touchscreen interface

Application Range

The CrimpCenter ACS does not use the standard conveyor with extension but automatically coils long wires. After processing the leading wire end on side 1 of the CrimpCenter, e.g. sealing and crimping, a linear gripper guides the wire from the cutting head and transfers it to the gripper of the coiling head. The subsequent feeding/coiling process is controlled by synchronized, high performance servo motors. After processing the trailing wire ends on side 2 the wire will be tied with adhesive tape by the integrated binding unit and collected on the stacking unit. The top of the stacking unit conveniently rotates so coils can be removed safely and easily while the machine is in production.

Technical Data

Workpiece Length

From approx. 4 m to more than 30 m (13.1 ft. – 98.4 ft.)
(depending on cable cross-section, sample inspection necessary)

Conductor Cross-Section

0.35 – 2.5 mm² (22 – 13 AWG)

Feed Rate

Maximum 9 m/s (29.5 ft./s) (depends on wire and wire packaging)

Dimensions (L x W x H)

1000 x 720 x 1700 mm (39.4 x 28.4 x 66.0”)

Weight

Approx. 175 kg (385 Ibs.)

CE-Conformity

The CrimpCenter ACS fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.

Important Note

Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.

More Info

Function

The CrimpCenter ACS automatically coils long wires into a ring. It can handle wires from approx. 4 m (13.12 ft) to more than 30 m (98.4 ft) in length depending on the wire size. The binding unit secures the coils with a simple tape for handling. Taped coils are collected on the stacking unit for easy removal. The stacking unit has 2 horizontally rotatable collection arms. While the coils are collected on one side, the coils from the previous batch are ready to be manually unloaded from the other. Wire coils need little storage space and are easy to handle for downstream processes.

Compatible with
Software
Quality Assurance
Crimp Height Measurement
Pull Force Testing
Peripherals
Marking / Printing / Labeling
Prefeeder
Cut, Strip & Terminate