Hydraulic Crimping Machine
The powerful CT 65 hydraulic crimping machine is designed for loose-piece, heavy gauge crimping applications. Its parallel crimping action delivers up to 150 kN (16.9 tons) of force for open barrel, closed barrel and heavy duty, 4-indent crimping applications.
The quality of the crimp is guaranteed by a full-cycle mechanism that assures that the dies have closed completely before they are reopened. The ergonomic 15 degree tilt of the machine provides an optimal viewing angle and the LED light enhances visibility of the crimping area.
The CT 65 features 3 programmable crimping profiles and job memory for up to 30 different jobs. Open and close positions can be programmed to minimize processing time and maximize quality. The interface can be locked with a key switch for quality assurance.
The quick-change system allows for fast changeover times between a variety of optional die adapters. The CT 65 is very simple to set up, program and operate. A wide range of crimping dies can be used by choosing the corresponding die adapter.
Due to its open construction, a variety of crimping or pressing applications can be handled on this powerful, yet relatively compact press.
- Parallel crimping action
- 3 programmable crimping profiles
- Crimp profile memory for up to 30 jobs
- Full-cycle mechanism ensures dies close completely before opening.
- Ergonomic 15-degree tilt provides clear view of work area.
- Integrated LED work light for added visibility
- Integrated safety shield surrounds the crimping dies.
- Electronic piece counter
- Easy foot pedal operation
- Quick-change die adapter system
A variety of crimp dies are available for the CT 65 for a wide range of applications. U-die adapters will accept some industry standard U-shaped crimping dies. Custom crimp applications might also be possible.
- Heavy duty
- Closed barrel
Conductor Cross Section
Up to 120 mm2 (4/0 AWG)
|Crimping Force||150 kN (16.9 tons)|
|Stroke||40 mm (1.58”)|
|Job Memory||Up to 30 jobs|
|Cycle Speed||Approx. 7 seconds at full stroke (without back stroke limitation)|
|Programming Increments||1 – 1.5 mm (0.04 – 0.06”)|
|Safety Shield||Fixed around crimping dies|
|Power Supply||230 VAC, 60 Hz|
|Noise Level||69 dB (A)|
|Weight||130 kg (286 lbs) / 150 kg (330 lbs) crated|
|Dimensions (L x W x H)||581 x 238 x 588 mm / 22.9” x 9.4” x 23.2”|
|CE-Conformity||The CT 65 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.|
|Important Note||Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.|
- EHC 10 or U-shaped die sets
- Crimp die adapters for EHC 10 or U-shaped die sets
- Custom adapters and die sets are available on request