UniStrip 2300

Stripping Machine

  • Overview

    The UniStrip 2300 programmable stripping machine strips wires ranging in size from 0.03 – 8 mm² (32 – 8 AWG) and jacketed cables up to 5.5 mm (0.22“) in diameter. This innovative machine does not require any mechanical adjustments to process different wire sizes.

    • No mechanical adjustments required when changing wire sizes
    • Touch screen user interface with intuitive simple programming
    • Very sensitive trigger sensor – works great for small, flexible wires
    • Can strip inner conductors of jacketed cables with short break out length
    • Preprogrammed cable library
    • Barcode scanning function
    • Wire list processing
  • Material

    • Discrete Wire
    • Solid Wire
    • Stranded Wire
    • Single Conductor Cable
    • Wire
    • Cable
    • Rubber
    • Kapton
    • PUR
    • PVC
    • Teflon®
    • Tefzel®
    • Multi-conductor Cable

    Processing Capabilities

    • Stripping

    Application Range

    The Schleuniger UniStrip 2300 strips wires ranging in size from 0.03 – 8 mm² (32 – 8 AWG) and jacketed cables up to 5.5 mm (0.22“) in diameter. This innovative machine does not require any mechanical adjustments to process different wire sizes. Using the color touchscreen, the operator selects the desired wire size from the preprogrammed library and all parameters (cutting diameter, clamping pressure, blade way back, etc.) are automatically set. The operator edits the stripping and pull-off lengths as required and the machine is ready for operation. The UniStrip 2300 begins the stripping process when the wire end touches the trigger sensor. The wire is automatically clamped and the stripping process is performed according to the programmed values. If desired, the program can be saved to internal memory for future use.

  • Technical Data

    Wire Size Range* 0.03 – 8 mm² (32 – 8 AWG)
    Stripping Length Increments 0.1 mm (0.01")
    Diameter Increments 0.01 mm (0.001“)
    Max. Diameter mm 5.5 mm (0.22")
    Max. Stripping Length 46 mm (1.81")
    Stripping length plus pull-off length must be max. 53.4 mm
    Max. Strip Length 26 mm (1.02“)
    Stripping length plus pull-off length must be ≤ 53.4 mm
    Cycle Time 0.35 s
    (0.75 mm² wire, stripping length 10 mm,
    pull-off length 5 mm)
    Cable Clamping Programmable clamping force
    Dimensions (L x W x H) 390 x 130 x 280 mm (15.3" x 5.1" x 11.0")
    Weight 10 kg (22 Ibs.)
    CE-Conformity The UniStrip 2300 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
    Important Note Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine. *Wires with hard insulations or those that are tightly bonded might not be able to be processed even if they are within the application range stated above. For cross sections larger than 6 mm² (10 AWG), sample processing is required.
  • More Info

    Features

    • Intuitive color touch screen user interface
    • Can strip inner conductors of jacketed cables with short break out lengths
    • No mechanical adjustments required when changing wire sizes
    • Very sensitive trigger sensor – works great for small, flexible wires
    • Operator has clear view of the entire working area
    • Barcode scanning function

    Programmable Processing Parameters

    • Pull-off speed
    • Stripping lenghts partial strip
    • Stripping lengths full strip
    • Extra spin time of the stripping head
    • Stripping diameter
    • Stripping position
    • Wayback (opens blades slightly before pulling off)
    • Feed rate of the stripping blades
    • Cable clamping force