CrimpCenter 63

High performance and short setup times
Simple operation with state-of-the-art software and touchscreen
Easy network integration in existing infrastructure (no proprietary technology)
Low maintenance costs due to use of standard components
Wide range of options and accessories available

Fully Automatic Crimping Machine

The CrimpCenter 63 is a fully automatic swivel arm crimping machine with 3 processing stations. At a maximum feed rate of 12 m/s (39.4 ft/s), the CrimpCenter 63 allows high-quality crimping, sealing, twisting and tinning of wires from 0.15 to 6 mm² (26 - 10 AWG) at maximum productivity.

Check configuration possibilities

With the optionally available thin & short wire processing kits, the CrimpCenter 63 easily processes wires down to 0.05 mm² (30 AWG) and 35 mm (1.38'') length.

Minimize Setup Time - Maximize Productivity

The CrimpCenter 63 is one of the fastest cut strip terminate machines on the market. At Schleuniger, however, we know that productivity is more than just speed. Short setup and change-over times can significantly increase your output.

With Schleuniger's innovative ToolingShuttle 60, setup and change-over of a crimping station takes less than 30 seconds. Depending on how often you change applications, this system increases your productivity by 30% and more.

ToolingShuttle 60

ToolingShuttle System (TSS)

The CrimpCenter 63 incorporates the latest technology in precision mechanics, software and networking. Highest output rates, short setup times and industry standard setting user-friendliness in both operation and maintenance make the CrimpCenter 63 a new generation cut strip terminate machine.

	measure & cut to length
	length encoder
	horizontal and vertical wire straightener
	full strip both sides
	2 step strip both sides
	partial strip both sides
	Crimp to Crimp
	Crimp to Crimp (closed barrel terminals with split cycle)
	Crimp to Seal
	Twist & Tin to Crimp
	Twist & Tin with Seal to Crimp
	Doubling crimp (same terminal on single ends)
	Programmable horizontal and vertical doubling
	integrated crimp force monitoring (with SLP 2000 C and SLP 2000 CP)
	good / bad sorting
	wire list processing (sequencing)
	Change-over of crimp applicator, terminal reel and paper winder in less than 30 seconds with ToolingShuttle 60 using Plug & Crimp technology
	Zip cord processing* (slitting, stripping and crimping)
	window strip*
	splice detection*
	pull-out force measuring*
	crimp height measuring*
	electric crimp height adjustment*
	inkjet printing*
	network integration*