CrimpCenter 61

High performance and short setup times
Simple operation with state-of-the-art software and touchscreen
Easy network integration in existing infrastructure (no proprietary technology)
Low maintenance costs due to use of standard components
Wide range of options and accessories available

Fully Automatic Crimping Machine

The CrimpCenter 61 is a fully automatic swivel arm crimping machine with up to 2 processing stations . At a maximum feed rate of 12 m/s (39.37 ft/s), the CrimpCenter 61 allows high-quality crimping and sealing or twisting and tinning of wires from 0.15 to 6 mm² (26 - 10 AWG) at maximum productivity.

Check configuration possibilities

With the optionally available thin & short wire processing kits, the CrimpCenter 61 easily processes wires down to 0.05 mm² (30 AWG) and 30 mm (1.18'') length.

Minimize Setup Time - Maximize Productivity

The CrimpCenter 61 is a very fast cut strip terminate machine. At Schleuniger, however, we know that productivity is more than just speed. Short setup and change-over times can significantly increase your output.

With Schleuniger's innovative ToolingShuttle 60, setup and change-over of a crimping station takes less than 30 seconds. Depending on how often you change applications, this system increases your productivity by 30% and more.

ToolingShuttle 60

ToolingShuttle System (TSS)

The CrimpCenter 61 incorporates the latest technology in precision mechanics, software and networking. Highest output rates, short setup times and industry standard setting user-friendliness in both operation and maintenance make the CrimpCenter 61 a new generation cut strip terminate machine.

	measure & cut to length
	length encoder
	horizontal and vertical wire straightener
	full strip both sides
	2 step strip both sides
	partial strip both sides
	crimp one side
	crimp one side (closed barrel terminal)*
	seal and crimp one side
	processing of hard shell seals or mini-seals*
	horizontal & vertical doubling crimp
	twisting/tinning one side**
	Tip welding (resistance welding of wire ends)*
	Thin wires up to 0.05 mm² (30 AWG)*
	integrated crimp force monitoring
	good / bad sorting
	wire list processing (sequencing)
	Change-over of crimp applicator, terminal reel and paper winder in less than 30 seconds with ToolingShuttle System (TSS) using Plug & Crimp technology*
	window strip*
	splice detection*
	pull-out force measuring*
	crimp height measuring*
	electric crimp height adjustment*
	Seal Check / Seal Scan
	printing (inkjet or hotstamp)*
	network integration*