Wire Management Has Never Been Easier
Iguana is a PC software for wire management of Schleuniger's semi-automatic programmable stripping machines. Upload and download functions allow programming to be carried out either directly in the software or on the machine - using the same icons and functionalities. To ensure correct programming, Iguana automatically detects the connected machine model.
Iguana PC Software with programmed coaxial cable
With graphical display of programmed cables, wire list management, printing of all programmed parameters per cable, backup & restore functionality, and simple machine software upgrade, Iguana simplifies handling of your semi-automatic stripping machine and increases your productivity.
| >> |
virtual demo: |
 1.7 MB |
 1.7 MB |
Cable Programming At Its Simplest
As all programming can be done on a separate PC, the wire stripping machine is not blocked during programming, thus saving precious production time. Simple icons and menu-guided operation make wire management easier than ever.
Iguana is available for the following machines:
- CoaxStrip 5300
- CoaxStrip 5300 NT
- CoaxStrip 5300 RX
- CoaxStrip 5300 MX
- CoaxStrip 5400
- CoaxStrip 5500
- UniStrip 2600
- EcoCut 3200 (menu BASICS only)
- EcoCut 3300 (menu BASICS only)
- PowerCut 3700 (menu BASICS only)
Download Iguana Now!
You can download the full Iguana Software directly from this website. Please note that some functionalities of the Iguana Software are blocked by password.
Zip-file (2.6 MB)
Depending on your internet access the download of the software (zip-file of 2.6 MB) may take some time. The zip-file contains a file called "Setup.EXE". When double-clicking "Setup.EXE", the installation of Iguana automatically starts.
Contact your local Schleuniger sales & service representative to obtain your password for the unrestricted use of all Iguana functionalities!
|